Basshaker Profiles - SimHub Forum

2 Bass shaker setup

Leon1234 — Wed, 09 Oct 2024 10:01:30 +0000

Does someaone have a natural feeling Bass shaker setup which a could use as base to start on? I have one under the seat and one under the pedal tray but it just feels off. Using the BST-300EX with mostly ACC and AC

Complete noob looking for Assetto Corsa Competizione Engine immersion profile. 1 x Dayton BST-1

D0A-WANTED — Wed, 17 Apr 2024 17:59:32 +0000

I just wanted to ask if anyone has an engine profile available for ACC?

I installed my first Dayton BST-1 to my rig the other day and purchased a copy of SimHub which I'm very pleased with.

Trouble is I'm not an audio engineer and just wanted to ask and see if anyone else is passionate about engine feedback realism from the BST-1 or alike?

Many people suggested not to bother with engine feedback and just assign wheel slip and road bumps etc instead, which is fine if your into the racing side of things as you get more feedback from what the car is doing when racing, but for me it's about how the cars engine sound feels. It's not everyday I get to sit in a GT car so I'm trying to get the best simulated experience. 😅

If there are no profiles, any tips into the engine frequency settings would be greatly appreciated.

Also.. Is there a way to paste a screenshot.?

Thank you!

Shaker Profile: F1 23: Custom Wheel Slip/ Brake Lock Effect and Custom Suspension Feedback Effects (Per Wheel)

DsgFibonacci — Thu, 20 Jul 2023 08:48:43 +0000

Here are my F1 23 brake-Lock, wheel Slip, and suspension telemetry NCalc Formula bindings for use within the bass-shaker custom effects. Data converted to output values between 0 and 100.

F1 23 sends positive and negative values for suspension and wheel slip. You can observe the data while driving and find the maximum and minimum values using the "plot" option once you find & right click the target telemetry data in the "Available Properties" tab of SimHub (had to check the "show game specific properties ('rawdata')" box for to find these specific properties). Use this max/ min range (enable anti-clip) from the live telemetry plot to determine the amount of compression or amplification the data needs in the shaker effects NCalc editor so the absolute value of the data is always between 0 and 100. Test by driving with the bass shaker live feedback plot open and tweak multiplication or division NCalc values to compress or decompress the output with more precision & to your preference, then fine turn and customize with thresholds/ linearity curves and input gains.

I did burn out, hard lockups, rumble strip surfing, and wall ramming tests to find the most communicative values and their respective value extremes.

In F1 23 telemetry the four car quadrants of the suspension and wheel properties start at (1) Rear Left, (2) Rear Right, (3) Front Left, (4) Front Right

these are my solutions; I have one bass-shaker so I usually just run the Wheel Slip effect for performance and only toggle suspension effects for immersion.

→ Wheel Slip (provides localized Acceleration traction and Brake Lock feedback)

Front Left

(abs(
)
*100)

Front Right

(abs(
)
*100)

Rear Left

(abs(
)
*100)

Rear Right

(abs(
)
*100)

→Suspension Acceleration

Front Left

abs()
/1000

Front Right

abs()
/1000

Rear Left

abs()
/1000

Rear Right

abs()
/1000

Request for ATS Bass Shaker Profile : American Truck Simulator

steve25469 — Mon, 19 Dec 2022 07:51:19 +0000

Just checking to see if there are any people out there with some well tuned bass shaker profiles for American Truck Simulator? I've been working on one myself, but it's been a little tricky to get all the various main vibrations to work without having them be overpowering on my buttkicker. lol I've also wondered if using the auto calibration feature my be a good option, but I'm still new to using SimHub's bass shaker setup. Previously I just used audio output to my rig's buttkicker, which does work pretty well in most games. Using SimHub's options though enables some SERIOUS fine tuning of what effects you do and don't want. :) I was surprised there aren't more shared profiles for various games posted here in the forum though.

How to set up a shaker exclusively for crashes

alex1982 — Tue, 30 Aug 2022 10:05:01 +0000

Hello, I have a pair of shakers mounted in the hip areas of the seat, it's not a pleasant feeling... perfect for crashes 🤣

How can I set up simhub to vibrate these speakers only on hard impacts with cars and walls (left and right if possible)

Thanks in advance!

loaded 4-corner wheel slip and oversteer haptics

blekenbleu — Sat, 24 Apr 2021 19:57:27 +0000

This is a set of 3 CUSTOM EFFECTs to simulate sensations experienced on track from street tires, which squeal with light loading and minor slippage, progressing to lower-pitched moans with increasing loads and slippage, then finally juddering near breakaway.

The first CUSTOM EFFECT simply allows the user to tune accelerations provided by SimHub 7.3.14.
A second CUSTOM EFFECT allows tuning SimHub's wheel slips to better warn near breakaway
A third CUSTOM EFFECT generates tactile feedback by converting tweaked accelerations to wheel loads and applying to conditioned slips. For example, a fully unloaded wheel generates no feedback..
A fourth CUSTOM EFFECT has been added to generate warnings when unloaded rear wheels begin slipping (oversteer while braking or lifting throttle). Steering wheel force feedback is good for warning about understeer; trailing throttle oversteer is trickier...

I use this profile with an SRS ShakeSeat (4 Dayton pucks in a seat cushion). It is further described here and there.

Looking for Shaker profiles Iracing

Simbob — Thu, 31 Dec 2020 19:17:19 +0000

Im using the Bass shaker option from Simhub for a couple of months now and it working perfect.

Use a cheap Aliexpress usb soundcard for connecting a Buttkicker Gamer 2. Im using 6 effects, but im looking for perfection.

These effects im using with Iracing, I found these through Reddit.

https://imgur.com/a/rLv1B6Z

per Wheel slip for iracing

Schnirbus — Sat, 16 May 2020 15:35:05 +0000

I put together an effect Group that can generate per wheel slip for iracing.

It does it by deminishing the slip effect on wheels that are "depressed" by using the long/lat acceleration values of the car.

Coz I couldn't figure out another way to share, I extracted the Data from my "shakeitbassshakersettings.json".

It#s by no mean any perfect. It's just my first itteration of solving the fact not having "per wheel slip" in iracing...