Boost gauge reads too much and reads 0 as full boost - Simhub General https://www.simhubdash.com/community-2/simhub-support/boost-gauge-reads-too-much-and-reads-0-as-full-boost/ All about SimHub! en-US Wed, 22 Apr 2026 05:12:06 +0000 wpForo 60 RE: Boost gauge reads too much and reads 0 as full boost https://www.simhubdash.com/community-2/simhub-support/boost-gauge-reads-too-much-and-reads-0-as-full-boost/#post-120 Wed, 17 Jul 2019 01:31:57 +0000 I can confirm that the max tow boost gauge does work

]]> Simhub General RollinRx7s https://www.simhubdash.com/community-2/simhub-support/boost-gauge-reads-too-much-and-reads-0-as-full-boost/#post-120 RE: Boost gauge reads too much and reads 0 as full boost https://www.simhubdash.com/community-2/simhub-support/boost-gauge-reads-too-much-and-reads-0-as-full-boost/#post-116 Sat, 13 Jul 2019 17:53:35 +0000 @admin5435

But is it possible to wire that sensor onto the boost gauge and then it will work?

]]> Simhub General RollinRx7s https://www.simhubdash.com/community-2/simhub-support/boost-gauge-reads-too-much-and-reads-0-as-full-boost/#post-116 RE: Boost gauge reads too much and reads 0 as full boost https://www.simhubdash.com/community-2/simhub-support/boost-gauge-reads-too-much-and-reads-0-as-full-boost/#post-115 Sat, 13 Jul 2019 17:45:46 +0000 @admin5435

The wire on the boost gauge I linked is a 3 pin. But I don’t know the voltage so I’ll just have to wait and see

]]> Simhub General RollinRx7s https://www.simhubdash.com/community-2/simhub-support/boost-gauge-reads-too-much-and-reads-0-as-full-boost/#post-115 RE: Boost gauge reads too much and reads 0 as full boost https://www.simhubdash.com/community-2/simhub-support/boost-gauge-reads-too-much-and-reads-0-as-full-boost/#post-113 Sat, 13 Jul 2019 17:34:34 +0000 @rollinrx7s

Sadly the sensor characteristics are not available from the product page, so it's impossible to say if this particular model will work
You need to find a model using a 0-5v signal sensor (3 pins) sensor, like this one : https://www.amazon.com/Sensor-Replacement-Sender-Pressure-CGQ01/dp/B01FODDUWM

Sadly the product page where I got my own gauge is not available anymore so I don't wan't to point you to a bad product.

]]> Simhub General Wotever https://www.simhubdash.com/community-2/simhub-support/boost-gauge-reads-too-much-and-reads-0-as-full-boost/#post-113 RE: Boost gauge reads too much and reads 0 as full boost https://www.simhubdash.com/community-2/simhub-support/boost-gauge-reads-too-much-and-reads-0-as-full-boost/#post-112 Sat, 13 Jul 2019 16:39:10 +0000 @admin5435

Ok thank you. I just bought another one so when it comes I’ll wire it up again and I’ll try to calibrate it.

but do you think this one will work?

https://www.maxtow.com/black-green-maxtow-60-psi-boost-gauge/?gclid=CjwKCAjwgqbpBRAREiwAF046JTLMh_YkJaWWDd5bWw4jy4GeuzVin7sJIjfZkZ8ljdNkA_gOhk8SmxoC9XkQAvD_BwE

]]> Simhub General RollinRx7s https://www.simhubdash.com/community-2/simhub-support/boost-gauge-reads-too-much-and-reads-0-as-full-boost/#post-112 RE: Boost gauge reads too much and reads 0 as full boost https://www.simhubdash.com/community-2/simhub-support/boost-gauge-reads-too-much-and-reads-0-as-full-boost/#post-107 Sat, 13 Jul 2019 07:26:37 +0000 Hi ! 

You can find the calibration process described here in SimHub :

Do not hesitate to check your gauges characteristics, SimHub generates a 0-5v pwm signal, but depending of the manufacturer/model it may vary (see https://github.com/zegreatclan/SimHub/wiki/Arduino-After-Market-Boost-Gauge#important-notes)

]]> Simhub General Wotever https://www.simhubdash.com/community-2/simhub-support/boost-gauge-reads-too-much-and-reads-0-as-full-boost/#post-107 Boost gauge reads too much and reads 0 as full boost https://www.simhubdash.com/community-2/simhub-support/boost-gauge-reads-too-much-and-reads-0-as-full-boost/#post-103 Sat, 13 Jul 2019 01:26:16 +0000 I recently wired a boost gauge to a arduino nano and the boost gauge reads 0 as full boost and also it reads too much its off by 7 psi please help I have no idea what to do.

]]> Simhub General RollinRx7s https://www.simhubdash.com/community-2/simhub-support/boost-gauge-reads-too-much-and-reads-0-as-full-boost/#post-103