DIY Wind sim questi...
 

DIY Wind sim questions with SimHub  

  RSS

Elaphe
(@elaphe)
New Member
Joined: 1 week ago
Posts: 1
02/12/2019 5:31 pm  

I'd like to add wind simulation to my cockpit. I think Simhub can help with that. Apart from the software, I guess I need a couple of fans and a controller board. What is the recommended controller? This one?

As regards the fans, what models do you recommend. I have room, so I think I can go for 14 cm fans (I need strong airflow). What rpm are recommended? Any model that is easy to install?


Quote
Wotever
(@admin5435)
Member Admin
Joined: 2 years ago
Posts: 65
02/12/2019 5:42 pm  

Hi ! 

This board is not supported, do not hesitate to take a look at the wiki for informations : https://github.com/SHWotever/SimHub/wiki#tactile-feedback-and-wind-simulation

If you want some strong wind I would encourage you to look for PWM compatible server fans, with these you don't need any power boards : https://github.com/SHWotever/SimHub/wiki/Arduino-Shake-It#pwm-fans , the only downside is that it's a bit difficult to find fans which totally stops, but with a bit a googling it's possible 😉


ReplyQuote
Share:

Please Login or Register