Help with Rotary Encoder - Simhub General

RE: Help with Rotary Encoder

grawsom — Fri, 10 Apr 2020 11:47:40 +0000

Posted by: @cd152

I have connected a three pin rotary encoder to the Arduino but sim hub fails to recognise it when I Use it.

I connected the ground pin to the GND on the Arduino and the two data pins on the encoder to D4 D5, and made the sketch. But when i use it on simhub it does not find it.

Is there a specifc way rotary encoders have to be connected on simhub when using a Nano?

Did you ever get this fixed - normally if you want it to be a "device" the Arduino hardware needs to supported as a device under windows - Nano don't.

Second, if using rotary, you need to have gnd as middle and the two others as inputs, and have pullup checked.

BUT if your not is DisCord go there help is allmost instant

RE: Help with Rotary Encoder

Axeldor — Wed, 01 Apr 2020 18:37:20 +0000

For what I saw in the arduino tool it looks like you have got to use 5 pin rotary encoders (the ones with push button).

I have used them and they do not work either anyway XDD

Help with Rotary Encoder

cd152 — Tue, 24 Mar 2020 13:06:54 +0000

I have connected a three pin rotary encoder to the Arduino but sim hub fails to recognise it when I Use it.

I connected the ground pin to the GND on the Arduino and the two data pins on the encoder to D4 D5, and made the sketch. But when i use it on simhub it does not find it.

Is there a specifc way rotary encoders have to be connected on simhub when using a Nano?