Rear channels are not working. - Simhub General

RE: Rear channels are not working.

simpilot — Fri, 26 Jul 2024 15:08:32 +0000

SOLVED. I changed the car on Iracing and the problem is solved. The problem occured when I was driving the car :F1 Mercedes Benz 2022. Then I changed ffor the Ferrari 296 GT3 and all channels are working fine. The problem is with the Iracing car F1 2022 Mercedes Benz

RE: Rear channels are not working.

simpilot — Thu, 25 Jul 2024 02:18:56 +0000

Hi! I have a similar problem. I have four bass shakers installed on each corner of my rig.

1- On the Sound Output tab, on test, each one of the 04 shakers works fine

2- On the effects tabs, you can see all effects (there are thre types : MONO, STEREO , QUADRIFONIC). If you ampliate the effect configuration, you can see the live data from game (Iracing, in my case)

3 - For all MONO and STEREO effects that i've selected , in the live data from game, I can see that the game signal is there , clear and real (You must be in Iracing session, driving a car, and at same time looking to Simhub live effects window)

4 - But, for some QUADRIFONIC effects (that is the CORNER efects) - (example: ROAD VIBRATION, ROAD IMPACT), that use 04 bass shakers, I can see only game signal from the two front channel (front suspension), and nothing (0) signal from the two rear chanel (rear suspension)...is very weird

5 - And to worse, in other some QUADRIFONIC effects (example: WHEEL SLIP; WHELL LOCK; ROAD RUMBLE) , I can see the live game signal in all 04 chanells working perfectlly ! And shakers works fine also for these quadrifonic effets (WHEEL SLIP; WHELL LOCK; ROAD RUMBLE)

Resuming... I have no live data from the REAR channels (LEFT and RIGHT)on these two quadriphonic effets : ROAD VIBRATION and ROAD IMPACT (FRONT channels LEFT and RIGHT are OK )

Could be Iracing problem ?

Any advanced user could help, please ?

Rear channels are not working.

Bruno1960 — Fri, 14 Jun 2024 14:44:13 +0000

Hi, I have a problem. I have my USB sound card set to 7.1 mode. When I test the channels in Windows, they work correctly. However, in SimHub, in the Sound Output section, when I do a test, channels 1, 2, 5, and 6 work correctly. But when I go to the effects section and do a test, the rear channels don't work. What could be causing this?

I thank you in advance for your help.