https://www.simhubdash.com/community-2/simhub-support/simhub-crashes-tensy-3-5/ All about SimHub! en-US Wed, 14 Oct 2026 19:26:27 +0000 wpForo 60 https://www.simhubdash.com/community-2/simhub-support/simhub-crashes-tensy-3-5/#post-3270 Sun, 05 Sep 2021 14:23:45 +0000 Hi ! Usually  it's happening when you leave the arduino scan all serial ports, you can control arduino serial port scan and peek only the required ports as shownd here : https://github.com/SHWotever/SimHub/wiki/Troubleshoot-other-hardware-Serial-ports-conflicts

Nicolas

]]> Simhub General Wotever https://www.simhubdash.com/community-2/simhub-support/simhub-crashes-tensy-3-5/#post-3270 https://www.simhubdash.com/community-2/simhub-support/simhub-crashes-tensy-3-5/#post-3267 Sun, 05 Sep 2021 12:22:18 +0000 Hello, has anyone here already made the experience that Simhub shoots down a Tensy 3.5? As soon as I open Simhub, the inputs from my steering wheel where a Tensy 3.5 is installed are blocked or the Tensy crashes. If I close Simhub and disconnect the steering wheel from the PC and plug it in again, everything works again without any problems. If I start Simhub again, the problem occurs again. Unfortunately I don't know what to do and I hope you can help me.

]]> Simhub General DerMaas https://www.simhubdash.com/community-2/simhub-support/simhub-crashes-tensy-3-5/#post-3267