RE: TM1638 is working but not my button matrix and encoders

Wotever — Thu, 18 Jun 2020 16:55:47 +0000

Hi !

To need an Arduino pro micro if you want gamepad features : https://github.com/SHWotever/SimHub/wiki/Arduino--Setup#recommended-arduinos

If you you use any other board you will exclusively be able to use it in simhub but not in the game.

Nicolas

TM1638 is working but not my button matrix and encoders

KMX — Thu, 18 Jun 2020 15:59:20 +0000

Hello Everyone,

I recently made a custom F1 wheel, in this i used the following hardware:

- Arduino Nano

- 10 Buttons (14 if you count the encoder buttons)

- 4 encoders

- TM1638 module

For the Arduino code I use the Arduino Configurator from SimHub.

I soldered everything together and the display works.

Now for the 14 buttons I used a matrix of 3 x 5 (I ran out of connections on my Arduino)

The encoders are wired directly to the board and so is the TM1638 module.

The buttons & encoders do show up in SimHub under 'My Hardware', but I can't use them in-game.

Also the device doesn't show up as a 'Controller' in 'Devices and Printers' on Windows 10.

I also tried not including the TM1638 module in the configurator but no luck there.

Am I doing something wrong here? I really don't understand.

P.S. i tried it in Assetto Corsa

Regards,

KMX