Combine PWM wind si...
 
Notifications
Clear all

Combine PWM wind sim with 3 pedal motors on one arduino UNO?

2 Posts
2 Users
0 Likes
319 Views
Xexets
(@xexets)
Eminent Member
Joined: 8 months ago
Posts: 26
Topic starter  

Hi! Is it possible with a motor shield V2 to combine three rumble motors AN two PWM fans?

motors would be on the shield, with DC into the shield. PWM fans would get current directly from another DC, be grounded on the shield pass through pin GND and have the two PWM controllers on pins 9 and 10 passthrough on the shield. Would it work?

 

PS I currently have the wind sim on an UNO connected as above, and 2 rumble motors on a NANO. I wanted to combine the two


   
Quote
AudiEtoffe
(@audietoffe)
New Member
Joined: 2 weeks ago
Posts: 1
 

I'm doing my first setup and also want to know if I can do this. I want 1 fan and 1 or 2 small haptic motors on one Uno motor shield preferably all taking power from  12v input on the shield 


   
ReplyQuote
Share: