Hello.my setup is 4 buttkickers minilfe in corner mode on. I did assign in the 8 channel mode map the effect only on the rear shakers but also the front ones shake when i change gear. why is that?ty my other effects are RPM, wheel slip, road vibration, road suspension and simulated road texture
Hi ! It means that the driver is mixing the channels, make sure to set in both and windows in quadriphonic mode. For the purpose you need to configure your sound card to be "neutral" as much as possible (not altering channels), some drivers may mix data by default, but the way to disable it varies with each model/driver, do not hesitate to refer to your sound card manual.
Also make sure that both windows sound card settings and driver control panel settings are both configured in the same mode, some sound cards requires it, and when it does not matches it makes a beautiful "mess" 😀
Ty for the answer. I see your point.but why all the shakers when i do the test in sim hub work fine and independent one from another, the other effects work fine like when i hit the kurb with the front left for example only that shaker shake as i ve setup in the control program but the Shift gear effect dont work fine like the others? and one more question please. I have a soundblaster Z and there is no quadrophonic mode. is 5.1 surround the same?ty
problem solved ty. just had to take out 2 speakers of the 5.1 config from the soundblaster z program