Notifications
Clear all
Topic starter
05/09/2021 2:22 pm
Hello, has anyone here already made the experience that Simhub shoots down a Tensy 3.5? As soon as I open Simhub, the inputs from my steering wheel where a Tensy 3.5 is installed are blocked or the Tensy crashes. If I close Simhub and disconnect the steering wheel from the PC and plug it in again, everything works again without any problems. If I start Simhub again, the problem occurs again. Unfortunately I don't know what to do and I hope you can help me.
05/09/2021 4:23 pm
Hi ! Usually it's happening when you leave the arduino scan all serial ports, you can control arduino serial port scan and peek only the required ports as shownd here : https://github.com/SHWotever/SimHub/wiki/Troubleshoot-other-hardware-Serial-ports-conflicts
Nicolas